View RF-5800H-MP_4971257.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
assuredcommunications(R)
RF-5800H-MP
advanced HF/vHF tactical Radio systeM
A fully integrated, compact communications system offering the security and performance features that missions demand
The RF-5800H-MP is a member of the FALCON II(R) family of multiband tactical radio systems. It is an advanced HF-SSB/VHF-FM manpack radio that provides reliable tactical communications through enhanced secure voice and data performance, networking, and extended battery life. The transceiver's extended frequency range (to 60 MHz) provides secure FSK 16 kbps CVSD voice and data in the VHF band in addition to the HF capability. It is like having two radios in one compact package. High speed data rates up to 9600 bps (HF) and selectable ARQ modes reduce on-the-air transmission time and enhance secure data transmissions for improved communications reliability and throughput. The combined robust digital voice (MELP, LPC-10) and serial tone data modem operate over poor communication channels. The RF-5800H-MP includes a last ditch voice mode and SMS-like messaging that transmit digitally, using ultra robust 3G waveforms for operation in channels where legacy waveforms will not work. A serial-tone ECCM waveform with DSP-based excision filtering and a 600 bps vocoder are combined to provide reliable, secure HF communications in the presence of jamming. Secure digital voice, 75 to 2400 bps data, and ARQ mode are supported in the ECCM mode. The latest third generation HF Link Automation, STANAG 4538, is included and provides high-performance ALE and data link protocols to deliver superior linking and error-free data transfer. The Harris Citadel(R) ASIC provides high-speed data and digital voice encryption using either a Harris-standard or a customer-unique algorithm. An internal Global Positioning System (GPS) receiver option provides local position information and Automatic Position Reporting (APR). This feature allows the radio to be used in situational awareness systems without PCs attached to the outstation radios. The accurate GPS timing data can be used for ECCM and advanced ALE synchronization. Integrated telephony capability allows the radio operator to place and receive telephone calls using the radio keypad when used with the RF-6010 Tactical Network Access Hub. The data capability and network management features of the RF-5800H-MP utilize industry standard IP-based protocols to provide fast, simple, and direct communications, and permit easy setup and maintenance of networks. The removable Keypad/Display Unit provides controls for on-the-move operation.
tactical
easy access to
specifications for the RF-5800H-MP
General
Frequency Range Net Presets Frequency Stability 1.6-59.999 MHz 75, fully programmable 0.5 x 10
-6
Environmental
Test Method Vibration Immersion Operating Temperature Per MIL-STD-810F Ground tactical 3 ft. (.9m) of water -40 to +70C
Emission Modes
J3E (single sideband, upper or lower, suppressed carrier telephony) H3E (compatible AM single sideband plus full carrier) A1A, J2A (compatible CW), selectable; F3E (FM telephone) 50 ohm nominal, unbalanced 26 VDC (20.5-32 VDC) Synchronous or asynchronous (RS-232C; MIL-STD-188-114A) 10.5 W x 3.5 H x 13.2 D in. (26.7 W x 8.1 H x 34.3 D cm) 10 lbs. (4.7 kg) without batteries
Features
HF: MIL-STD-188-110B App. C (9600 bps and 12,800 bps uncoded), App. B 39-tone (2400 bps), (maximum data rate) Serial Tone (2400 bps), STANAG 4285 (2400 bps), STANAG 4415 (75 bps), STANAG 4539 (9600 bps), FSK (600 bps) VHF: FSK (16 kbps) STANAG 4538 FLSU, MIL-STD-188-141B Appendix A Serial Tone ECCM HF: LPC-10-52E (600/2400), MELP (600/2400), VHF: CVSD STANAG 4538 (3G), pFED-STD-1052
RF Input/Output Impedance Power Input Data Interface Dimensions (with battery case) Radio Weight
Encrypted Data
Automatic Link Establishment (ALE) Frequency Hopping Vocoder
Receiver
Sensitivity Audio Output Squelch IF Rejection Image Rejection AGC Intermodulation Distortion Overload Protection SSB: -113 dBm (0.5 V) for 10 dB SINAD 15 mW at 1000 ohm to external handset Front panel adjustable, active squelch selectable Greater than 80 dB Greater than 80 dB (1st IF image) Mode dependent, automatically selected -80 dB or better for two -30 dBm signals separated 30 kHz or more Receiver protected to 32 VRMS
Data Link Layer Protocol (ARQ)
System Configuration
Digital Encryption RF-5800H-MP025 RF-5800H-MP026 RF-5800H-MP035 RF-5800H-MP036 RF-5800H-MP065 RF-5800H-MP066 Citadel Citadel Datotek/Citadel Datotek/Citadel AES/Citadel AES/Citadel GPS -- Internal -- Internal -- Internal
Transmitter
Power Output Audio Input Carrier Suppression Undesired Sideband Suppression Spurious Outputs (Greater than 20 kHz from Fc) Antenna Tuning Capability 1, 5, 20 watts PEP/Average -1/+2 dB (1, 5, 10 watts FM) 1.5 mV at 150 ohm or 0 dBm at 600 ohm for full rated output Greater than 60 dB below PEP output (J3E mode) Greater than 60 dB below PEP output -50 dB relative to rated output, except harmonics which are -40 dB minimum for f = 1.6-30 MHz
o
Major System Components
RF-5800H-V006 RF-5832H RF-5833H RF-5834H RF-5382H RF-382A RF-5845H 20-Watt Vehicular Adapter 125-Watt Power Amplifier 150-Watt Vehicular Adapter Unit 400-Watt Power Amplifier 150-Watt Antenna Coupler 400-Watt Antenna Coupler Pre/Postselector
OE-505 10-foot (3 m) whip (1.6-60 MHz) RF-1936P (AS-2259) NVIS (3.5-10 MHZ) RF-1940-AT001/RF-1941 dipole
RF Communications | 1680 University Avenue | Rochester, NY USA 14610 www.harris.com | 1-585-244-5830
Specifications are subject to change without notice. (c) Copyright 2009 Harris Corporation 02/09 DS-211L

▲Up To Search▲

Price & Availability of RF-5800H-MP

	To Download RF-5800H-MP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .